Beaded Ornaments

If you like a little extra sparkle on your Christmas tree, you’ll love these beaded ornaments!  This is the perfect ornament to make and take to an ornament exchange, and you will be the hit of the party!

Materials:

  • Glass seed beads and or glass bugle beads
  • Glass or plastic Christmas ornaments (any size)
  • Glue: Mosaic Mercantile (mosaic tile adhesive) or Weldbond glue or any type of glue for glass
  • Pipe cleaners
  • Shoe box top
  • Optional acrylic paint, ribbon

Directions:

Let’s talk glue first, Tacky Glue will work but will not give the holding power that a glass glue will.  Mosaic Mercantile is found in some craft stores and on line this is my favorite for this project, Weldbond is easily found in the store.  I have been making these beaded ornaments for about five years and the beads are still holding strong!  Now your first thought is just to put glue on the ornament and roll in the beads, ok that will work but will not give you a smooth single layer of beads, you will end up with a lot of beads glued together and a mess!

I found that working a small area at a time (and with some patience) the results are beautiful.  Trust me it’s worth the time.  You can use glass or plastic ornaments, I like to buy them after Christmas when they are marked down 50 to 75% off!  And it will not matter what color you buy, you can paint them with acrylic paint!  So if you buy purple ornaments paint them a new color first.

I like to cover the top cap (the hanger) with bugle beads (they are the long thin bead), but that’s me!  If you are not going to do this, glue the top cap on to the ornament.  Or wrap cap with silver or gold ribbon and glue in place!

Run a line around the cap, and place a bugle bead in glue one at a time.  Let dry.

         

Now that the top is dry, we are going to start gluing on the beads, working in small areas at a time.  The reason for this is the glue  is very sticky, so to get the smooth single layer, working in small areas and letting it dry before moving on to next area, will have the best results.

You might have noticed in the list of materials I have a shoe box top, I use it as my bead catcher!  The glass beads can bounce off (all over the floor) if you don’t keep them contained.  When I’m finished with the beads I just pour them from the box into a baggy!

Place a layer of glue 2” by 2” (small area at time) on your ornament and sprinkle or pour on the beads, gently tap off the lose ones.  With your finger or finger nail, gently pat them in place, add more if you did not get a solid coverage.  I like to hang the ornament on a pipe cleaner to dry.

    

The goal is to have a single layer of beads, so when dry it feels smooth!

    

Keep going until totally covered.

It’s easy to make designs with the beads, using the bugle bead to create a swirl and then filled in with seed beads.  Run a line of glue in a swirl or “S” shape, and place a bugle bead on one at a time.  Again glue a few “S” shapes at time, let dry and do more.  If your glue line is to thick, do not worry, the seed beads will cover up the glue.

When totally dry, add 3 green seed beads to each end of the “S” shape, and fill in with seeds beads.

If you are like me, you will want to make more than one at a time.  I find working on 4 to 6 at a time, you can keep working, by the time you finish one, another will be dry, keep going and you will have finished all them!

Seed beads and bugle bead come in so many colors, which means endless possibilities!

  

  

 

  

They look stunning on a Christmas tree, and beautiful displayed in a dish or bowl.

  

I also beaded small 1″ ornaments, and hung them from white glittered branches for a unique center piece.

For added fun, I like to make wire hooks in a “S” shape using 14 gauge colored wire!

Hope your Christmas sparkles this year!!

 

Beaded Wire Cross Ornament

Believe it or not these beaded cross ornaments are easy and inexpensive to make.  You can take this simple idea to form any shape with wire and then wrap in beads, maybe a star, heart, candy cane or Christmas tree!

Materials:

  • Seed beads
  • Wire cutters
  • 26 gauge wire
  • 20 gauge wire (for the cross shape)
  • Paper for shape pattern
  • Optional: 18 gauge wire for hanger

Directions:

I made about 50 of these ornaments (for party favors)  I wanted them all the same size, so I made a pattern.  By drawing out the size I wanted on paper, made it so easy for all my crosses to be the same size!

Using 20 gauge wire to form the cross shape, I started with a small loop on one end (this will be the top for hanging the ornament) made my cross shape by twisting the wire around its self and ending back at the top, finishing by wrapping the wire around and around, cutting off what I did not need.  My cross is 4 1/2″ long by 2″ wide, I cut a piece of wire 18″  to 20″ to make this size cross.

Now that the cross form is made it’s time to bead.  I love using the 26 gauge wire, it is so easy to work with.  Jo Anns carries this wire in all colors, it is permanently colored copper wire by Darice 30 yards for about $2.50 (bring a coupon!) so it goes a long way!  For this size of cross you do want to use glass seed beads 10g size (they are the small ones) and these beads come in all colors!  Again Jo Anns carries them in small packages for about $1.00 to $1.50 (coupon!) and the beads go a long way.  Bottom line, this is an inexpensive project!

Cut a long piece of the 26 gauge wire, not too long as it will make it hard to work with and you can add more wire along the way!  I like to start at the top, wrapping the wire around the wire cross,  string on a few beads and start wrapping the beads around.  I like to work the beads down then back up, this makes it easy to fill in an area that may need more beads.

Remember it you run out of wire, you can add more.  simply wrap a new piece of wire around the form and keep going.

I have wrapped just one layer of beads, so it would not be too thick!

I love the look, with some of the wire showing, remember the wire comes in colors!  You can use red wire for different look, I like the color Gun Metal.

For an added touch I made hooks from  18 gauge wire, just a simple ‘S’ shape and this wire comes in colors also!

Oh the possibilities!!

This one I add just a few larger red beads!

 

Just an idea, tie a beaded cross on a gift box or bag!!

Or in a shadow box frame!

 

Christmas Tree Stand

Want your Christmas tree to look taller and have more room for all the Santa gifts?  This tree stand will give your tree a new look!

Materials:

  • Container (I have used a light weight plastic 14″ tall with 18″ opening)
  • 1 1/2” round PVC pipe cut to 14” long
  • 1 can of Great Stuff
  • Gloves
  • 1 small bag of fast setting cement
  • 18″ wreath and or garland
  • Optional: small rocks, extra tree lights and an extra pair of hands

Directions:

This tree stand is not at all hard to make, but you need to plan ahead because of drying time.  I found my container on sale at the end of summer for $15 (good deal).  I liked the color, but in the past I have spray painted my containers black or red.  If you want to spray paint to change to color do this first.  Home Depot sells PVC pile 24″ long and in varying sizes, you want to tree to fit snug, so double check the size for your tree (if you smile big for the Home Depot guy he will cut it for you for free) my container is 14″ tall so I cut my pipe 14″ (at Home Depot the pipe cost me about $2.80)


Follow the directions on the bag of cement, and mix enough to be at least 6″ thick (more if you want, just remember you will have to carry and store your stand).  This is when you might need an extra set of hands, pour in the cement; place and hold PVC pipe in center making sure it balanced straight, give the cement a few minutes and double check your pipe to make sure it is straight. If you have any cement dips on the out side of container, wipe them off before it dries.  Let cement dry.

If you feel you need more weight in your container add some small rocks.  Read and follow the directions on the can of Great Stuff. If you have never worked with Great Stuff before get ready…it really is great stuff.  Great stuff is made to expand, and it will expand as part of the drying.  Spray the Great Stuff around the pile and let dry.  A can of Great Stuff is about $3.00.

Take an 18″ wreath and place in container and wrap garland in center and up and around the pile and if you do not have a wreath, just use garland to hind everything.

I like adding an extra string of light in and around the wreath/garland area and even up into center of tree.

You are ready to put your tree in!  How tall is your tree now…I love this because my cheap 7 1/2′ tree is now 9 feet tall! And it cost me under $25, not so bad.

Here’s my extra cool idea…. during the summer I fill the container with rocks (river rocks medium size) just to cover up the Great Stuff and I use it as an umbrella stand for my large pool umbrella.

Framed Button Wreath

This is so pretty and can be made using things around the house – scrap booking paper, extra buttons, some ribbon scraps, a frame (this is the perfect opportunity to use a frame that doesn’t have the glass!).

Materials:

  • Frame with out glass *square shape I think works best; I’m using a 10″ square frame
  • White buttons different sizes
  • Tacky glue
  • Decorative paper that finds into your frame (wrapping or scrap booking paper)
  • Piece of card stock that will fit in frame
  • Scrap piece of paper for circle pattern
  • Optional: 3 small red jingle bells, hot glue, red ribbon for bow

Directions:

Cut your decorative paper and a piece of card stock to fit in your frame. Glue the decorative paper to card stock (this is just to give support the buttons get heavy), cut a 3″ circle from scrap paper for the center guide to make the wreath.  Place on your decorative paper, and get your buttons ready.  Start by gluing buttons around the circle.

Remove the center pattern circle, and keep building your wreath.  Use different sizes and do not worry it there are spaces, we are going to make a layered ring on top.

Keep gluing, adding glued buttons on top of each other.  Let dry when you have the wreath enough buttons.

Let dry (remember, Tacky glue dies clear!).  Place wreath paper into frame.  Make a red bow for the top of wreath (I like wired ribbon), and glue in place.  Hot glue 3 small red jingle bells off to one side. (No bells? How about red buttons?)

This wreath is fun and easy to do, it can be made in any size.  Look around for old square frames and start gluing buttons!  How adorable will this framed wreath look in your home or maybe as a special gift?!

Try green buttons on some pretty white/silver paper?

Button Snowmen Gift Tags

Recycle your buttons and scrap card stock into these easy snowmen gift tags!

Materials:

  • Card stock paper: red, white, green
  • 2 white buttons with only two holes one smaller for head/larger one for body
  • White gel pin
  • String or ribbon
  • Double stick tape
  • Scissors and or paper cutter
  • Black felt (for hat)
  • Red string for snowman bow
  • Tacky glue
  • hole puncher
  • Optional: 2″ circle punch

Directions:

Cut white card stock into a 2 1/2” square, with hole puncher make a hole in corner, pull string or ribbon through. Cut red card stock smaller then the white piece, punch or cut a 2″ circle.  With double stick tape, tape each piece in place.  Cut a small black felt hat that fits the button you are using for the head.  Tie a small red bow from string or ribbon.

Using a smaller button for the snowman’s head.  Place the buttons on the green circle, turning the smaller button (face) so the 2 holes are side ways, and the larger button (body) the holes go up and down.  Glue in place with tacky glue, glue on hat and small bow.  With the white gel pin make stick arms and small hanging heart.

I think they are cute enough to hang on the Christmas tree!

 

 

Jingle All The Way Holiday Shadowbox Decoration

This adorable decorated shadow box frame is a simple gift that anyone would love or the perfect decoration for your mantel, bookcase or wall.

Materials:

  • Shadow Box Frame (any size)
  • Wrapping Paper or Holiday Card Stock (that will fit into frame)
  • Stickers (any size) to spell out “Jingle All The Way”
  • Jingle Bells that will fit inside the shadow box frame
  • Ribbon
  • scissors
  • Wax paper
  • Optional: Large jingle bell for bow

 

Directions:

Remove back of shadox box frame, cut holiday paper or wrapping paper to fit back of frame.  Fill inside of frame with bells (make sure the bells can move around inside), put the frame back on the frame.

Cut a piece of wax paper the size of your frame, and arrange the stickers “Jingle all the Way” on the wax paper.  This way you can see how the letters will fit and look on the out side of the frame.  Now stick the stickers in place on the glass.

Tie matching holiday ribbon around the outer side of frame, making a bow on top and add extra larger bell to bow.

This frame I used a sticker tree for the I in jingle, glued a bow with hanging bells from the top and add snowflakes.

Wooden Clothespin Painted Santa Ornament

A little paint, a little time and you have these adorable Santa ornaments for your tree or gift bags!

Materials:

  • Wooden Doll Pins 3 3/4″ package of 30 (sold in craft stores)
  • Acrylic paint: red, white, black, flesh tone
  • Paint brush(s)
  • Snow-Tex Glittering Snow (sold in craft stores in with the paints)
  • 20 or 18 gauge wire
  • Star wire garland
  • Clear Gloss Varnish (sealer)
  • Optional: fine sandpaper, old shoe box, toothpick(s), Q-Tip

Directions:

I have found that on old shoe box works great as a drying rack for this project, but totally optional. If find that the wooden pins to be rough, sand with fine sandpaper. Paint the upper ball and part of one side of the front (see picture below),you will need at least 2 coats.  With red paint, paint around the white in front and the back, you will need at least 2 coats. Make a small oval with flesh tone paint on the white side (see picture below).

We are going to make 2 little eyes, I have found that using a toothpick makes this easier than a small brush.  Dip the tip of the toothpick into black paint and make little eyes (try it on scrap paper to check your size). Mix a little red and white to make darker pink for his mouth, and paint just a little oval (see picture).  Now add more white to your pink, making it lighter for his rosy cheeks, I like using a Q-tip to paint on his cheeks.

We are almost finished – let’s add a little personality1 Dip a toothpick into white paint and make a very small dot in each black eye (try it on scrap paper to check your size).  With small thin brush or the tip of the toothpick give Santa 2 eye brows.  Ok he does look just a little funny, but stay with me….

With a Q-Tip or brush add more white paint around his head, making it look like fur? At this point check to size of his painted mouth, if too large paint some white around to make it the size you like.  Load a small paint brush with white and make his mustache, at just two strokes, from the center out left then from the center right. Let dry.

Paint on a coat of gloss varnish (sealer) and let dry.

For Santa’s beard I like using Snow-Tex Glittering Snow. With a paint brush, apply Snow-Tex below his mouth and down.

Cut a piece of wire 20 or 18 gauge about 12″ long, string a small bell on,twist bell in place.  I like to curl wire around paint brush or pencil, then wrap around top twisting wire in place (don’t worry if it looks funny we are going to cover it).  Take a piece of wired star garland about12″ to 18” long and wrap ends to curl around paint brush or pencil, now wrap/twist to top of Santa covering wire.

Santa is ready for the tree or to decorate gift bag. Ho ho ho!

Painted Wooden Clothespin Snowman Ornament

These little snowmen will add charm to any Christmas tree or gift box!  They are quick and simple, and make a great project to do with the kids!

 

Materials:

  • Wooden Doll Pins 3 3/4″ (package of 30, sold in craft stores)
  • Red or Green felt for hat
  • Acrylic paint: white, black, orange, red and or green
  • Clear Gloss Varnish
  • String or ribbon for hanger
  • Thin ribbon (to tie on hat)
  • Paint brush
  • Black Ultra Fine Sharpie
  • Glue (I like hot glue)
  • Scissors
  • Optional: small jingle bell, sequin snowflake, Twinkle Crystal by DecoArt (glitter paint),fine sandpaper, toothpick, Q-tip

Directions:

Paint the wooden pins white (you do not need to paint the top ball part because the hat will cover it). If needed, sand with fine sandpaper; sometimes the sides are rough so just smooth with a little sanding.  It will take 2 or 3 coats of white paint, I have found that an old shoe box works great for a drying rack (you are going to want to make more than one). With black paint make 2 eyes (look at picture below for placement) and with red paint make a simple scarf, one stroke from the right side, one stroke from the left, small circle (knot) then two separate strokes down make tales to the scarf (hope that makes it easy).

Make a carrot nose with orange paint, let dry and add rosy cheeks.  Mix red and white to make a soft pink, I find it easy to use a Q-tip as the brush, just a quick up/down.  My next little trick is to use a fine line Sharpie pen for the smile, just 4 or 5 little lines and lets add some personality by adding 2 little eye brows with the Sharpie (wasn’t that easier than a thin paint brush).  Now for the white in his eyes, looks hard but it’s not, dip the end of a toothpick into white paint and make a little dot in each eye(you might to test out the size on scrap paper first).  After drying, paint with a coat of Crystal Twinkles (glitter paint…I love this stuff!). Let dry and paint with a coat of gloss varnish.

Let finish with the hat, cut a piece of felt 2″ by 3″. Fold up one side of the 2″ side and glue, glue hat on the snowman.  String a small jingle bell on to thin ribbon and tie tight with a knot around top of hat, you may need to cut a little off.

For the hanger, side or glue thin ribbon or string through tied ribbon on hat. Glue a sequin snowflake on hat.  You are finished!

How many of this cuties are you going to make?  They are great for the Christmas tree, and fun tie on to a gift bag or box!

Button Snowman Pin

These cute little snowmen pins are so quick and easy (not to mention a great way to put all those spare buttons to use!).

Materials:

  • 2 buttons- smaller for head, larger for body: buttons with 2 holes
  • 1 small pin back that will fit behind your buttons
  • small strip of fabric or ribbon for scarf
  • Super Glue or any strong holding glue

Directions:

Find the size buttons that work for you – smaller for head and larger for body.  Glue the smaller head button on with the button holes going cross ways, then glue larger button on with the button holes going up/down.  When glue has dried, tie on a fabric or ribbon scarf, and that’s it! Easy-peasy!

What a cute gift for a teacher or friend to get them in the holiday spirit!

 

Gift In Recycled Pop-Top Can

Looking for a unique and eco-friendly way toThe surprised look you get when you give the decorated can as a gift is so worth the effect.  Recycling your pop top soup cans will be a sure way your special gift will be remembered!

Materials:

  • Pop top soup can (opened from bottom of can)
  • Can Opener that makes a clean cut out from the side not the middle of can (I used a Pampered Chef can opener)
  • Holiday paper or wrapping paper
  • 8″ – 10″ piece of ribbon (to hold gift inside can)
  • Scissors
  • Double stick tape
  • Glue (Super Glue, Weldbond or any strong glue)
  • Gift that will fit inside the can-gift card, money, jewerly, key to new car
  • Optional: Gift tag, extra ribbon, bells, stickers for decorating can, Zots adhesive dots

Directions:

Your can needs to be a pop top can (like some soup and veggie cans), and the can opener is the key to this unique gift wrap idea. I used a Pampered Chef can opener, it cuts the can open from the side, making it possible to glue back on without anyone notice. First pick your can and open from the BOTTOM.  Remove label, clean the inside and bottom cut out piece,and dry them off.

Cut wrapping paper or holiday scrapbook paper to fit around can, and tape in place. Add decorative ribbon or sticks.  Now it’s time to put your special gift in!  With a piece of ribbon about 8″ – 10″ long, tape or tie your gift to one end and on the other end stick strong double stick tape (I like to use Zots clear adhesive dots). You are going to stick the ribbon with tape on it to the inside top of the can, I use the earser end of a pencil to gently push taped end to stick to the inside of the can.

Put your gift into the can, and run your glue around the edge of bottom of the can (the piece you cut out) and place back on can. Push and hold in place, wipe out extra glue and let dry. You can’t even see that the can has been opened! 🙂

Add a gift tag and get ready for your special gift to be opened.  You might get some interesting looks, just point to the top and watch them pop in open.

What a fun way to give a gift!  Are you having soup tonight?!?

So much fun let’s do it again…what will be in this one?!

If anyone’s lucky enough to be getting a new car, this is a great way to give the key!

 

 

Sharing with: Tip Junkie

 

 

Related Posts Plugin for WordPress, Blogger...