Flower Punched Eggs

With any fun shaped punch you can create this beautiful eggs in no time!

Materials:

  • Small size decorative punch (I used a flower shape)
  • Pretty paper(s)
  • Sequin straight pins or any short straight pin
  • Smooth foam eggs
  • Thimble
  • Optional: Acrylic paint and sequins

Directions:

I like the look of the smooth foam eggs and you can paint them!  But you could use any foam egg for this project.

Now start punching!!  If you are going to paint your eggs let your paint dry before you start to pin in the paper. Some colors of paint might take two coats. I just took an old tissue box made some small holes, put a toothpick in the egg and painted using to box a the dry rack!

Now that you have the paper punched and your eggs ready, just push a straight pin through the paper shape and push into the egg. The smooth foam is harder to push pins in, you might want to try a thimble.

It is up to you are how close to want to pin the shaped paper.  I did some very close together and other were you could easily see the flower shape, just up to you on the look you like.  Also by painting the eggs it changes to look!

This is a great project to do when you can sit, watch TV and pin away!  They go together fast.

Make sure you really push the pin into the egg!  The smooth foam will hold the pin in tight you will not need to add glue.

Fill a basket or bowl with all the beautiful eggs for a perfect centerpiece or use them as place cards on your holiday table!

If you like a little extra sparkle, pin in a few sequins.

Happy pinning!  Hope you are inspired.

If you like these eggs check out how I took this idea to Christmas ornaments!

 

Fabric Pumpkins

Make your own unique pumpkin patch in an afternoon!

Materials:

  • Fabric (I’m using a piece 14″ by 22″)
  • Natural Jute
  • Poly Pellets
  • Hot Glue Gun and Glue
  • Poly-Fil (stuffing)
  • Sewing machine, thread, needle
  • Scissors

Directions:

I’m using a piece of fabric 14″ long by 22” wide.  This will make a 6” to 7” tall finished pumpkin.  By changing the size of the fabric, it will change the size and shape of the finished pumpkin!

If you do not have a sewing machine, you can easily make one by just hand stitching!!

Let’s make pumpkins!!  Start folding the fabric in half, right side to right side making your piece 14” long by 11”wide, sew down the 14” side.  Now sew a long gathering stitch across one side which will become the top (stitch by hand or machine).  Cut a piece of jute about 12” long, hand gather the bottom (the end without the gathering stitch).  Wrap and tightly tie the jute around gathered fabric about 2” to 3” in, make a tight knot and cut off extra jute if needed.

Turn your soon to be pumpkin inside out!  Pour in some Poly-Pellets for weight in bottom of pumpkin.  Add some Poly-Fil (stuffing), do not over stuff.

This is the bottom of the pumpkin!

Start pulling the gathering threads around the top.

With needle and thread stitch top closed.  I like to tuck in the raw edge of the fabric down then stitch closed.

Cut 3 pieces of jute, each about a yard long, holding the 3 pieces make a knot in middle.  Spread out the jute to make 6 strands, place the middle of the bottom of the pumpkin on the knot.  Bring up 2 of the jute pieces that are opposite of each other and tie in a knot on the top center of the pumpkin.  You do not want to make it too tight, you might want to play around with it and see how you like it.  Do this two more times, all the jute will now be tied up.

This is the bottom of the pumpkin!

This is the top with one pair tied.

I like to make sure that one of the jute ties is over the seem.

Now you have all 6 pieces of jute on the top, make one big knot, nice and tight.  Do not cut the jute yet, we are going to use it to make the stem!

Pull 2 of the jute strings out, and gather up the other 4. Fold down the 4 making it about 2” tall (this is going to be the stem, so make it shorter or tall to what you like), take the other 2 and tie a knot holding the other 4 in place.

Now fold up the tale, tie another knot, cutting the jute so it fit into the loop.

With one of the long jute piece, start wrapping up and then down (I like to end at the bottom) add a touch of hot glue to hold end of jute in place.  Now do the same with the next piece of jute (I like making the bottom of the stem thicker), glue in place when finished.  If you want a thicker stem, wrap more jute.

You are done!

Are you going to make a pumpkin patch!!

This stem I just folded over all 6 and tie a knot, cutting off the extra jute!

How about using ribbon instead of jute, for a different look!

Hope you are inspired to make your own pumpkin patch!

 

Crepe Paper Flowers

So much fun to make these beautiful flowers!  They are made from crepe paper, making color possibilities endless!!

Materials:

  • Crepe Paper (I have used white, light pink and dark pink)
  • Floral Wire for stems
  • Hot glue
  • Floral Pearl centers
  • Scissors
  • Wire Cutters
  • Optional: bleach, food coloring, ink pads

Directions:

Cut out petal shapes from the crepe paper, I cut off about 18” and folded several times and then cut my petals (you are going to want to make a lot).  For the center cut about a 3″ strip of crepe paper, fold in half and make cuts downward, making it look like fringe!  With hot glue, glue the floral pearls for the center, then glue and wrap the fringed strip.

Now glue each petal, gluing around the center, then around with next layer until you have enough (I made them in different sizes)!  I even made some that looked like buds.

Some of the flowers I bleached the tips and dipped in food coloring!!  In a small bowl use straight bleach (you might want to go outside, you must have good circulation!!),  dip end into the bleach to remove the color, let dry on newspaper. When petals are dry, dip into food coloring, and let dry!

These I  dipped into bleach only!

These petals were dipped in food coloring!

These I used ink pads, inking the ends of the petals for a different look!!

These elegant crepe paper flowers would be beautiful added to or covering a wreath!  How about in fall colors…I think that might be my next project:-)

Framed Chicken Wire

I have been having so much fun with old wooden frames! Recycle an old frame into a fun message board, by backing it with chicken wire!

Materials:

  • Wooden frame
  • Chicken wire
  • Wire cutters
  • Tape measure or yard stick
  • Small nails with heads and small hammer
  • Optional hook for hanging, ribbon, small clothespins, ribbon and or rag flowers

Directions:

I went to a local feed store for the chicken wire, it’s 36″ long and sold by the foot ($1.20 a foot)!

I found my wooden frame at the flea market, removed old nails, sanded and painted it!  Once your frame is ready, measure the inside of the frame, and cut the chicken wire with wire cutters to your frame size.

Depending on where you cut on the chicken wire pattern you may need to cut off or bend back sharp point of the wire.  For this reason I would cut the wire just a bit larger, lay the wire in the frame, then cut or bend the wire to fit!

Once you have the perfect size, lay the wire in the frame and nail into place.  I found nails with a small head worked the best for me.

This picture shows where I had to bend the wire for a good fit and makes it easier for nailing in place.

Done!! Now it’s time to have some fun…ribbon and flowers!

Simply weave ribbon around and through the wire.

I added 3 flowers!

Found small wooden clothespins, glued buttons on some!

Super fun and unique message board! Hope you are inspired to make one!!

 

Grape Vine Wreath Snowman

How adorable is this snowman made out of grape vine wreaths!  This idea has been around for awhile, but he is so simple to make and fun to add your own personal touches too!  He can hang from your front door or hang him inside.  Even quicker, make him out of green wreaths.

Materials:

  • 1 18″ grape vine wreath
  • 2 12″ grape vine wreaths
  • Foam black hat
  • Red felt 56” long by 8” wide ( about 1/4 yard)
  • 2 Bells 1 1/2″
  • 1 Bell 1″
  • 1 1/2″ Red ribbon for hat about 14” long
  • 3/8” Silver ribbon (about 1 yard)
  • Black wire or black pipe cleaner
  • 3 white pipe cleaners or wire
  • 1 red pipe cleaner
  • 2 silver plastic 2 1/2″ ornaments for “buttons”
  • 1 can White spray paint
  • Scissors
  • Optional: bird for top of hat, 4 snowflake picks, holy pick for side of hat

Directions:

The first and second wreaths are both 12″ in size, however I did look through all the wreaths to find one smaller than the other!!

Start by spray painting white all 3 wreaths.  You can leave them natural or even use green wreaths, it’s all about the look you want.  While the wreaths are drying, cut the foam black hat in half.  I found this hat at Michaels ($3.99 without coupon).

  

Once the paint is dry, lay out the smaller 12″, the other 12” and then the 18” wreath, with white pipe cleaners attach them together (12″, 12″ 18″).  With a black pipe cleaner or wire, attach the hat to the top of the wreath.  The wire or pipe cleaner easily pushes through the foam hat, and around the wreath.

   

With a white pipe cleaner or wire make a hanger, under the hat on the wreath, this will give a hanger for a door hook or nail.  Wrap ribbon around the hat and add a holy pick.

   

At this point I think it is easier to work on him hanging up, slide him on a door hang!  Add the bird to the top of the hat.

For the scarf I’m using red felt, but if I had a holiday scarf I would have used it!  Cut the felt 56″ long (longer if you like) by 8″ wide, cut “fringe” on each end.  Lay out the scarf and fold over each side, this way you will not see any raw edges!  Now wrap scarf around the snowman and just loop it on, it’s too thick to make a full knot!

   

String all 3 bells onto a red pipe cleaner, then wrap bells around scarf and tie onto wreath, keeping the scarf and bells in place.

   

Slide plastic (silver) ornament onto 3/8” silver ribbon, slide one end of the ribbon through wreath, tie ends in a bow and let the ornament hang down.  Tie ornament/ribbon on the other wreath…how cut are the snowman buttons!!

Add a few snowflake picks.

   

Done!!

The wreaths were about $4.88 each (without a coupon!!), 1/4 of a yard of red felt $1, foam hat $3.99 (without a coupon), bells $1, holiday picks (4 snowflakes, 1 bird, 1 holy) on sale $2.50 and spray paint from Home Depot under $2, I had the ribbon and pipe cleaners!  Using coupons with Snowman cost under $15.00.

Frosted Glass Candle Holder

A can of Frosted Glass spray paint, stickers, decorative punches, and a glass vase or recycled jar, the possibilities are endless!

Materials:

  • Frosted Glass spray paint
  • Glass vase, candle holder, glass jar
  • Stickers
  • Decorative punches

Directions:

I’m using two sizes of snowflake punches.  Punch out the stickers and firmly place on outside of the glass piece and spray with Frosted Glass (outside) let dry and remove the stickers!

 

This one I just used the round stickers!

I wanted to make a stripped vase using masking tape, but my tape was too old, so I used rubber bands!

I think my oil bottle has a new life as a vase!

This is a vary inexpensive project, the spray I purchased from Jo Anns with a 50% off coupon for about $3.00 and sprayed four different pieces, (I had the stickers and the snowflake punches), Micheal’s had the glass candle holder/vase on sale $2.50!

 

Pine Cone Deer

How cute are these little deers!  Just pine cones, sticks and glue, add a red pom pom nose or a jingle bell, couldn’t be easier.  The kids will love helping find the perfect pine cones and sticks!!

Materials:

  • Pine cones different sizes, and not broken or too old
  • Sticks and branches for legs and antlers
  • Glue: Hot glue or any strong holding clear glue
  • Scissors and or small branch clippers
  • Optional: gloves, bells, ribbon, small ornaments, small birds, red pom poms

Directions:

Time for a pine cone hunt,  you do want to be picky picking your pine cones!  You do not want them too old, falling apart or broken, you also want different sizes, I like the head to be smaller than the body!  For the legs and antlers, I cut a branch from one the oak trees (it needed to come down), and cut the ends for the branches for the antlers and the thicker straighter branches for the legs.  I did let them dry out for about 2 days!  If you are using branches that have fallen to the ground, check to make use they are still in good shape, not too old!

  My box of branches….ready to go!

For the legs you want them some what straight, and the same size (thickness) for all 4 legs.  Cut off any small branches off.  Do not cut them too short, wait and cut them to the size of your deer pine cone, mine were  4” to 4/12″ long!

Have different sizes and shapes of end branches for the antlers.

Match up the pine cones, find the pair that look the best together.  I like the head (pine cone) smaller than the body.

You may need to wear gloves, then gluing!  I using hot glue, it’s just quicker, but if the kids want to help (please be careful using hot glue around children) but if they are willing to hold the pieces together while the glue sets…why not (try Weldbond glue)! For the deer body, as you see in the picture above, the head (pine cone) goes one way, the smaller end is the nose, and the body (pine cone) the other way.  Find the best spot for both pine cones, where you can push them together and get a good hold, now that you have a good spot, pull them apart and glue, hold in place until glue has set.

See how the two pine cones are pushed down together.

For the legs, before you glue, find just the right spot, 2 for front legs and 2 back legs.  Cut the leg branch to the right size and glue ( about 4” to 4 1/2” long).

    

Make sure your deer can stand on it’s own!

Now for the antlers, pick 2 branches, and fit them to the top of the larger end of pine cone, pushing into pine cone for a good fit. Make sure the antlers do not make the deer top heavy, if the deer falls over, the antlers are to large and or too heavy.  Now glue antlers into pine cone.

   

Done…now maybe a red pom pom nose, tie on a jingle bell or small ornament!

 

How about silver spray paint!

     

Maybe add a little bird in a nest, and jingle bell.

       

Are you inspired!

 

Paper and Bead Ornaments

So fun and fast to make these beautiful balls using decorative paper punches!  Every year I like to have a “girls” holiday party, and what would a party be without a party favor, these are this years party favor!

Or maybe a bowl of the flower balls to match your decorator!

 

Materials:

  • Decorative punch (I using a flower punch)
  • Card stock paper
  • Glass seed beads in coordinating colors
  • Sequin pins: gold or silver
  • Smooth foam balls, your choice of size I’m using 2″ and 3″ balls
  • Acrylic paint for the foam balls
  • Paint brush
  • Optional: for hanger, eye pins or wire,  fishing line, ribbon or string, Tacky glue

Directions:

I do think it is best to use the smooth foam balls!  Start by deciding on your colors, and paint the foam balls.  I find it easy and fast to stick a tooth pick into the ball, paint it and then stick into foam sheet or card board box to dry (the tooth pick hole will be covered with a flowers)!   You do want a good coat of paint, but remember you will be covering with flowers!

While the balls are drying, start punching, and punching and punching.  I tried to count when I was making a 3″ ball, it was around 80 flowers and it will depend on how close together you put them.  Since I was making about 75 covered balls, I just punched each of the colors I wanted to use and put them in bags, when I ran out of that color I just punched more!

I found the Sequin pins from Jo Anns for 99 cents for 300 and of course I used a coupon!  But any thin straight pin will work, you just have to make sure the seed bead will slide on and stay on!

Pick your seed bead color and slide one bead on the pin and stick on a flower. Now I just pushed it right into the ball, but you could dip the end of the pin in Tacky glue if you felt like it needed it.

Since I was making sooo many, I found it easier to sit and watch TV 🙂 and slide on the bead and flower and make a bowl full and then put them on the balls!

I also found that if the card stock was super thick (like some of the heavy glitter ones from Micheal’s) they were too hard to punch and way to hard to push a pin through….just thought you should know!

Remember it’s up to you on how close together to put the flowers, it gives you a different look when the flowers are on top of each other!  If you do not do the pin gluing, it’s no problem to move the flower pin around, which you might need to when you are fitting in the last ones!

To make a hanger, I’m using an eye pin (which is used to make jewelery) but works great for this project or you can use wire. First slide the seed bead on, then the a flower and dip the end of the pin in Tacky Glue and push into ball!  Tie fishing line or ribbon on and hang your ornament!

Here is tip, I found that Velum paper works great (I used velum paper for the snowflake balls, second picture from the top) and it’s a beautiful look, it comes in colors like red, gold and silver!

Think about a different shape of punch, hearts, snowflakes, two different sizes of flowers…what shapes do you have!

I also love them just in a large glass bowl!  A fun and inexperience way to add color and or texture to your coffee table?

Did you know you can get the foam in an oval egg shape….Easter eggs how much fun!

How about making a topiary, one (or two) large ball covered with flowers, use a ribbon wrapped wood dowel as the stem, and placed in any vase or pot!  So pretty for a baby shower or bridal shower center piece.

 

Beaded Ornaments

If you like a little extra sparkle on your Christmas tree, you’ll love these beaded ornaments!  This is the perfect ornament to make and take to an ornament exchange, and you will be the hit of the party!

Materials:

  • Glass seed beads and or glass bugle beads
  • Glass or plastic Christmas ornaments (any size)
  • Glue: Mosaic Mercantile (mosaic tile adhesive) or Weldbond glue or any type of glue for glass
  • Pipe cleaners
  • Shoe box top
  • Optional acrylic paint, ribbon

Directions:

Let’s talk glue first, Tacky Glue will work but will not give the holding power that a glass glue will.  Mosaic Mercantile is found in some craft stores and on line this is my favorite for this project, Weldbond is easily found in the store.  I have been making these beaded ornaments for about five years and the beads are still holding strong!  Now your first thought is just to put glue on the ornament and roll in the beads, ok that will work but will not give you a smooth single layer of beads, you will end up with a lot of beads glued together and a mess!

I found that working a small area at a time (and with some patience) the results are beautiful.  Trust me it’s worth the time.  You can use glass or plastic ornaments, I like to buy them after Christmas when they are marked down 50 to 75% off!  And it will not matter what color you buy, you can paint them with acrylic paint!  So if you buy purple ornaments paint them a new color first.

I like to cover the top cap (the hanger) with bugle beads (they are the long thin bead), but that’s me!  If you are not going to do this, glue the top cap on to the ornament.  Or wrap cap with silver or gold ribbon and glue in place!

Run a line around the cap, and place a bugle bead in glue one at a time.  Let dry.

         

Now that the top is dry, we are going to start gluing on the beads, working in small areas at a time.  The reason for this is the glue  is very sticky, so to get the smooth single layer, working in small areas and letting it dry before moving on to next area, will have the best results.

You might have noticed in the list of materials I have a shoe box top, I use it as my bead catcher!  The glass beads can bounce off (all over the floor) if you don’t keep them contained.  When I’m finished with the beads I just pour them from the box into a baggy!

Place a layer of glue 2” by 2” (small area at time) on your ornament and sprinkle or pour on the beads, gently tap off the lose ones.  With your finger or finger nail, gently pat them in place, add more if you did not get a solid coverage.  I like to hang the ornament on a pipe cleaner to dry.

    

The goal is to have a single layer of beads, so when dry it feels smooth!

    

Keep going until totally covered.

It’s easy to make designs with the beads, using the bugle bead to create a swirl and then filled in with seed beads.  Run a line of glue in a swirl or “S” shape, and place a bugle bead on one at a time.  Again glue a few “S” shapes at time, let dry and do more.  If your glue line is to thick, do not worry, the seed beads will cover up the glue.

When totally dry, add 3 green seed beads to each end of the “S” shape, and fill in with seeds beads.

If you are like me, you will want to make more than one at a time.  I find working on 4 to 6 at a time, you can keep working, by the time you finish one, another will be dry, keep going and you will have finished all them!

Seed beads and bugle bead come in so many colors, which means endless possibilities!

  

  

 

  

They look stunning on a Christmas tree, and beautiful displayed in a dish or bowl.

  

I also beaded small 1″ ornaments, and hung them from white glittered branches for a unique center piece.

For added fun, I like to make wire hooks in a “S” shape using 14 gauge colored wire!

Hope your Christmas sparkles this year!!

 

Halloween Banner

This fun Halloween banner made from card stock is the perfect easy decoration.  Make it with all ghosts, pumpkins or one of each, it’s up to you.

Materials:

  • Card stock paper white, black, orange, yellow, green, brown
  • Scissors
  • White gel pen for cat and black pen for monster
  • Cord or string
  • Tape
  • Tacky Glue and or Double stick tape
  • Optional brown or black ink pad for owl

Directions:

Start by cutting your triangles (with scissors or paper cutter), I used 8 1/2″ by 11″ card stock for each triangle.  But the fun part is you can make this any size (larger or smaller) and make all or some of the characters!

Save all the scrap pieces!

Now for the fun, to make each one…so simple.  For the ghost cut and glue two oval eyes or a shape you like.

For the candy corn, start with a white triangle, top with a piece of yellow, then orange, glue (or use double stick tape) in place then cut!

For the black cat, starting with the black triangle, cut and glue (or double stick tape) two ears on top (I made small triangles).  Cut two white eyes, cut two small circles for center of eye, glue onto the triangle.  Make an orange nose (any color) glue on, with a white gel pen draw the mouth and whiskers!

For the brown owl, he needs two ears ( I made small triangles), two white eyes with small black center, yellow long triangle nose and two brown wings for the side.  For his wings I inked the edges so that detail would stand out!

The orange pumpkin needs a brown stem and one or two green leaves, glued to the top.  Cut eyes, nose and mouth from black card stock and glue on.

The green monster, needs two white eyes with black center (any shape, I made squares), a black mouth, black hair and a black neck bolt cut and glue!  For the stitch marks I used a black pen.

Lay out each triangle in the order you want for your banner and tape string or cording along back with a little space between each, and you are ready to hang the banner up!

Related Posts Plugin for WordPress, Blogger...