Fabric Pumpkins

Make your own unique pumpkin patch in an afternoon!

Materials:

  • Fabric (I’m using a piece 14″ by 22″)
  • Natural Jute
  • Poly Pellets
  • Hot Glue Gun and Glue
  • Poly-Fil (stuffing)
  • Sewing machine, thread, needle
  • Scissors

Directions:

I’m using a piece of fabric 14″ long by 22” wide.  This will make a 6” to 7” tall finished pumpkin.  By changing the size of the fabric, it will change the size and shape of the finished pumpkin!

If you do not have a sewing machine, you can easily make one by just hand stitching!!

Let’s make pumpkins!!  Start folding the fabric in half, right side to right side making your piece 14” long by 11”wide, sew down the 14” side.  Now sew a long gathering stitch across one side which will become the top (stitch by hand or machine).  Cut a piece of jute about 12” long, hand gather the bottom (the end without the gathering stitch).  Wrap and tightly tie the jute around gathered fabric about 2” to 3” in, make a tight knot and cut off extra jute if needed.

Turn your soon to be pumpkin inside out!  Pour in some Poly-Pellets for weight in bottom of pumpkin.  Add some Poly-Fil (stuffing), do not over stuff.

This is the bottom of the pumpkin!

Start pulling the gathering threads around the top.

With needle and thread stitch top closed.  I like to tuck in the raw edge of the fabric down then stitch closed.

Cut 3 pieces of jute, each about a yard long, holding the 3 pieces make a knot in middle.  Spread out the jute to make 6 strands, place the middle of the bottom of the pumpkin on the knot.  Bring up 2 of the jute pieces that are opposite of each other and tie in a knot on the top center of the pumpkin.  You do not want to make it too tight, you might want to play around with it and see how you like it.  Do this two more times, all the jute will now be tied up.

This is the bottom of the pumpkin!

This is the top with one pair tied.

I like to make sure that one of the jute ties is over the seem.

Now you have all 6 pieces of jute on the top, make one big knot, nice and tight.  Do not cut the jute yet, we are going to use it to make the stem!

Pull 2 of the jute strings out, and gather up the other 4. Fold down the 4 making it about 2” tall (this is going to be the stem, so make it shorter or tall to what you like), take the other 2 and tie a knot holding the other 4 in place.

Now fold up the tale, tie another knot, cutting the jute so it fit into the loop.

With one of the long jute piece, start wrapping up and then down (I like to end at the bottom) add a touch of hot glue to hold end of jute in place.  Now do the same with the next piece of jute (I like making the bottom of the stem thicker), glue in place when finished.  If you want a thicker stem, wrap more jute.

You are done!

Are you going to make a pumpkin patch!!

This stem I just folded over all 6 and tie a knot, cutting off the extra jute!

How about using ribbon instead of jute, for a different look!

Hope you are inspired to make your own pumpkin patch!

 

Burlap Flowers

These twisted burlap flowers are the perfect touch for fall.  Group them on a burlap covered wreath, small ones on a name card, napkin ring, or on a gift bag!

Materials:

  • Burlap
  • Scissors
  • Hot Glue

Directions:

Start by cutting the burlap into strips, the thicker the strip the bigger the flower, the thinner the strip the smaller the flower.  For a medium size flower cut a 3” to 3 1/2” strip, the best way to get a straight strip with not a lot of raving is to measure, cut that string running the length and pull the string out, this way give you a perfect straight cut (to make all your strips straight start by being this on the end of the burlap, starting you off with a straight side).

Finger fold the strip in half, fold in one end (see picture below), with a drop of hot glue, glue down and roll once.

Keeping the burlap folded with your fingers, start to gently turn/twist the strip, wrapping around center, not too tight.  After a few times stop and glue into place, be careful with the hot glue too much and it will come through the burlap and burn your fingers.  Wrap and twist, take a look, undo it and start again before adding glue.

When you have the flower to the size you like, cut off the burlap, leaving a tail about 1 1/2″ long for gluing.  Just tuck the end to the back and glue.

Now you are ready to add the burlap flowers to a wreath or maybe make napkin rings!

Burlap comes in all colors, check it out next time you are in the craft store.

 

Easy Sew Turkey

These fabric turkeys will add festive charm to your table scape, mantel, or bookshelves.  You will need basic sewing skills for these cuties, but don’t worry – it’s not too tough for a novice.  They are made from a simple pattern, only 2 pieces, and the size is very easy to change (bigger, smaller, fatter!).  Get your sewing machine out and gather up some fall fabric!

Materials:

  • Turkey pattern {DOWNLOAD PATTERN PDF HERE}
  • Muslin for body of turkey, 4″ by 13″ for 1 body
  • Fall fabric for tail, 6″ by 12″ for 1 tail
  • Matching felt 6″ by 6″ (to tail)
  • Matching DMC floss or thread for tail
  • Paint: black for eyes, red for gobbler
  • Tooth pick
  • scissors
  • Sewing machine with matching thread to turkey body
  • Stuffing
  • Rice
  • Glue or hot glue
  • Buttons and blush make-up with Q-tip

Lets make a turkey.  Trace and cut the turkey body (cut with fold on bottom).

For the turkey tail you will need one match piece of felt and 2 pieces of fall fabric. Sew around the turkey body with 3/8 seam allowance.  Ok stay with me, I know it looks odd.  Two more seams and done! We are going to make him stand up.  Flatten bottom to make a room to make a seam (I sewed these seams in dark thread making it easier to see).  Hard part done, and I know it still might not look right…but it is.

With scissors cut a slit in back.  And clip with scissors around turkey body.  Turn right side out.  Now do you see what is happening….he will stand.

Fill bottom half with rice (or what ever you might have) and fill upper part with stuffing.  Stitch closed, this is the back no one will see this side.

Now for his tail.  Cut the fall fabric and felt, I cut all 3 at the same time.  Pin all 3 together to make it easier to hand stitch.  You will need to layer the pieces as showed in picture.  I like to use DMC floss, but thread can be used.  Quick stitch around tail through all 3 pieces.  Glue tail to back of turkey body (I used hot glue). With black paint make 2 eyes and maybe eye brow, I find using a tooth pick makes it so easy.  Just dip the tip of the tooth pick in your paint to make the eyes and a quick stock for brow.  If you’re not sure, practice on scrap fabric or paper.   Now red for the gobbler.  I used felt for his beak, paint will also work.

Buttons can be glued on; on one I cut fabric circles and just stitched them on.  One last step – with a Q-tip rub a little make-up blush on his cheeks.

Kid’s Artwork Turkey

Gather the kids, grab some paint and lets make paper turkeys that stand up!  How adorable are these  just make sure that Grandmother gets one, too!  These turkeys are so easy that any age can help make them.  This turkey pictured here has water colored tail feathers, but if you can get the kids to put their hands in paint.  I love the tail feathers to be hand prints.  Check out the turkey at the bottom.

Materials

  • Turkey template {DOWNLOAD TEMPLATE PDF HERE}
  • scissors
  • glue
  • paint for turkey body brown and paint for tail feather (I used water colors)
  • Card stock, poster board or any heavy type of paper
  • red and yellow paper
  • 2 eyes

Are the kids ready to paint?  Paint the turkey body and strip brown.  Fold strip to make a rectangle, 1″ on top and bottom, 2 1/2″ on the sides (there will need to be a small overlap to glue).

Cut a yellow beak and a red gobble.  Glue on eyes (or paint), beak and gobble.

Glue the center strip to back of turkey body.

Now for the tail.  I ran out of white card stock (due to too many little artists who love to paint) so I used white paper plates (2) and I liked the way it turned out!  When dry cut into feathers, I cut 7.  Cut a half circle shape out of card stock, glue on your turkey feathers.

Glue the tail with feathers to the center strip.

How much fun!  Check out the turkey below with the hand print tail feathers.  Made the same way, just used the hand print for feather.

This turkey pattern can be adjusted, making him smaller or big. If you change the size larger, made the center strip larger so he will stand up.

 

Felt Napkin Rings from Paper Towel Roll

If you have crafting children or one who wants to try out a fun craft, this might be it! I have made these out of felt, but scrapbook paper or construction paper would work great too.

Materials

  • scissors
  • felt or paper (I used felt in brown, light brown, tan, green and orange)
  • glue or hot glue
  • Paper towel roll
  • DMC floss or thread (optional) and needle
  • Optional: Leaf template {DOWNLOAD TEMPLATE PDF HERE}

Cut the paper towel roll into 2 1/2″ pieces. You could get 4 pieces or rings from one roll.  Cut the dark brown felt so it will cover the roll and glue in place.

Download the leaf pattern (or make your own).  Cut out the leaves from light brown and green (each ring will have one of each).  A fun idea would be to let the kids paint or color paper leaves.

With DMC floss or thread, stitch on leaves.

Cut a strip of tan felt that will fit around the napkin ring.  With floss or thread quick stitch down the center.  Glue around each ring.  From the orange felt cut strips and make a knot in center.  Glue one green and one light brown leaf on each ring, and add the orange tie.

These napkin rings will add that special charm to your table, and your kids will be so proud to have their creativity on display!

Quick & Easy Festive Fall Candle Holders with Beans

This is a quick and easy way to add a touch of fall to your table.

I did a layer each of popcorn, dried red kidney beans and dried green split peas, then tied hemp around the the vase.  Check out the dried bean section in the grocery store on your next visit.

This candle I glued a band of the dried green split peas on the candle, then tied hemp around it.

If  you have left over dried beans, let the kids make Christmas ornaments (it’s not too early to be thinking about Christmas decorations, is it?!?).  Glue beans to card stock or post board cut into shapes, then spray paint.

Paper Pumpkin Place Cards

These simple little pumpkins are so quick and easy and add that extra charm to your festive table!  They can be place cards with a name or display words of things to be thankful for.  Maybe even let the children cut & decorate the paper with paint or markers and let them finish the pumpkins with each guest’s name or what they are thankful for.

 

Materials

  • Place card Pumpkin template {DOWNLOAD TEMPLATE PDF HERE}
  • Card stock paper (I used orange)
  • Card stock paper for name tags (I used green)
  • Small hole puncher
  • Twine or ribbon
  • scissors
  • optional: 2″ round circle punch (for name tags)

 

Directions

Start by downloading the pattern.  Trace on cardstock paper. If you only have white card stock, why not let the kids paint the paper orange then trace the pattern?

 

Cut your pumpkin shape and cut or punch what you will use as the name card. I used a 2″ punch.

 

Fold up the pumpkin sides, match to stem and a good fold on bottom, both sides.  Holding the two sides together, punch a hole where you want your tag to hang.

Have your tags ready with guest and family names, your favorite thankful thought or write something simple like “Give Thanks”.  Punch a hole in the tag, run twine or ribbon through both sides of pumpkin and tag, and tie a bow or knot.

Done! Now how simple and festive are these place cards?!

 

 

 

 

 

Fall Candle Holder from Recycled Jars

These quick, easy, and charming recycled jars are a snap to create and make great centerpieces or hostess gifts.  Gather up some scrape burlap, ribbon, felt, twine, and fabric, and you’re almost done!

The hardest part is deciding on which jar to use! Look for different shapes and sizes,  make sure a candle fits in side.  First cut burlap that fits your jar.  I did use a little double stick tape to hold in place.  Then add ribbon, twine, felt leaves, or a fabric flower.  If you do not have fall ribbon, just cut a strip of fabric.  Put your favorite candles in (maybe pumpkin scented) and enjoy!

“Give Thanks” Recycled Painted Jars

If you have some extra glass jars that were headed for the recycling bin, don’t toss them just yet! Use them to create this adorable decoration that can be adapted for any season or occasion! Look for jars of different sizes and shapes  If you have the lids, great! If not, you can still made it work.  🙂

I’m using fall colors to go with my saying “Give Thanks”, but the possibles are endless – Welcome, Happy Birthday or maybe even Happy Holidays! You could use the same jars and just switch the sayings for each season!

Materials:

  • Jars with lids (can be done without a lid) I used 7
  • Acrylic paint (I’m using 7 different colors)
  • Twine
  • Sticker letters to spell out Give Thanks
  • Cardstock paper and/or Kraft paper
  • Hole punch
  • Scissors or paper cutter
  • Double stick tape
  • Optional: Ink pad (brown), 3-D adhesive square or dots, berry pick, wire and pinecone

 

Directions:

Select the jars you like, make sure they are clean inside and out.  (Goo Gone is great for getting off the sticky labels!)  Get out the acrylic paints and find your colors.  Line your jars up in the order you want to display them , and match your paint to the jar. I like to put my paint in front of the jars in order to get a look at how the colors and jar shapes flow.  Now that  you know which color is going into each jar, the fun part begins…here we go!

Pour some paint into the jar – about 3 tablespoons (you can always add more). Put the lid on and roll jar around, letting the paint coat the inside.  If the kids are old enough (we are using glass!) get them to help. After you see the paint has covered the inside, with lid still on, turn jar upside down for just a few minutes, letting the extra paint run into lid.  Take the lid off, throw it away and let the painted jar dry upright.  Repeat for each jar. FYI:  it might take an afternoon for the paint to dry.

While the paint is drying let’s work on the saying, “Give Thanks”.  I’m using stickers (from the scrap booking section of the craft store) – one style  for “give” (which I’m putting all together on one jar),  and different styles of stickers for each letter of “thanks” (which I am going to use a different jar for each letter).

First cut Kraft card stock paper or colored card stock to a size that fits your jars.  The paper that I will stick  “give” on to  is a different size than the others. I cut the papers for “thanks” all the same size  (mine are 1 1/2″ by 2 1/2″) and  I inked around the sides.

Cut another piece of card stock, smaller than the first .  I inked around the sides with brown, and add a letter.  Do this for each letter until you have t-h-a-n-k, and a larger one for “give”.

With a punch, make a hole for the twine or ribbon.  I made only one hole for the twine to go through for each letter of “thanks” since the paper is skinner. Since my “give” is larger and different type of sticker, I wanted it tie on a little different.  So I punch 2 holes, bring the twine through one hole and around to the other.  Making a small knot on each end.

I used twine to tie the letters on, but ribbon would work also.  Pull both ends of twine through punched hole, looping around jar.  You can pull it tight or loose to let the letter hang down.  Make a knot to hold in place.

Get creative with recycled jars and paint!

I will be changing my jars to say “welcome” after the Thanksgiving season is over. Half the work will already be done, I can use the jars and just change the letters and the order of the jars for a new look!  So easy and fun! 🙂

Just a reminder, acrylic paint is water based, which means if you were to fill a paint coated jar with water (if you wanted to put fresh flowers in jar) the paint will start to dissolve.

Decorative Paper Pumpkins

These cute little pumpkins are so easy and versatile – they can be in any color or shape, tall and thin to big and round! Gather up your fall colored card stock paper, and a few sticks from the yard and you’ll be ready to make pumpkins! Add the pumpkins to your centerpiece, on the fireplace mantel, in the kitchen, or – my personal favorite – tie on a cute little name tag and use them as place cards!

 

Materials:

  • paper pumpkin template {DOWNLOAD TEMPLATE PDF HERE}
  • card stock paper
  • stick (from the yard)
  • hot glue
  • scissors
  • optional: twine, ribbon, wire,decorative name card

 

Directions:

Download and cut out the pumpkin pattern.  I’m using a rustic orange color of card stock, but choose a color that works for you.  Trace 8 pumpkin shapes and 1 center piece.  Fold each pumpkin shape in half.

For the center of the pumpkin find a stick the size and shape for the stem.  I curled wire (6″) around a paint brush to add with the stem.  Take the center piece of pumpkin pattern and roll it (you could use a pencil or paint brush), not to small.  Now slide your stick (stem) and curly wire in center and hot glue (the stick (stem) should not stick out to bottom of center).

Let’s glue…run hot glue down the folded edge of pumpkin shape, lining up the straight part of the pumpkin shape with bottom of center piece (see picture).  You want the pumpkin to sit flat on bottom, so each time you glue make sure it’s lining up straight.

I think it is easier if the first 4 shapes are glued across from each other in a X pattern (see picture).

Now glue the other 4 shapes in between. And you made a paper pumpkin!  You can add ribbon or twine to the stem.

Now that you have seen the basic shape, it’s easy to change to size and shape to make paper pumpkin patch of different pumpkins!  (Remember when you change the size, make the center to fit also.)

Have fun and get creative, cut your pumpkin shape with decorative edge scissors (I used Ripple) or give the kids the card stock paper to paint or draw on before you cut.

To make paper pumpkin into a place card, I punched a 2” decorative circle for each person’s name and tied it on with twine…so cute!

Related Posts Plugin for WordPress, Blogger...