Felt Napkin Rings from Paper Towel Roll

If you have crafting children or one who wants to try out a fun craft, this might be it! I have made these out of felt, but scrapbook paper or construction paper would work great too.

Materials

  • scissors
  • felt or paper (I used felt in brown, light brown, tan, green and orange)
  • glue or hot glue
  • Paper towel roll
  • DMC floss or thread (optional) and needle
  • Optional: Leaf template {DOWNLOAD TEMPLATE PDF HERE}

Cut the paper towel roll into 2 1/2″ pieces. You could get 4 pieces or rings from one roll.  Cut the dark brown felt so it will cover the roll and glue in place.

Download the leaf pattern (or make your own).  Cut out the leaves from light brown and green (each ring will have one of each).  A fun idea would be to let the kids paint or color paper leaves.

With DMC floss or thread, stitch on leaves.

Cut a strip of tan felt that will fit around the napkin ring.  With floss or thread quick stitch down the center.  Glue around each ring.  From the orange felt cut strips and make a knot in center.  Glue one green and one light brown leaf on each ring, and add the orange tie.

These napkin rings will add that special charm to your table, and your kids will be so proud to have their creativity on display!

Quick & Easy Festive Fall Candle Holders with Beans

This is a quick and easy way to add a touch of fall to your table.

I did a layer each of popcorn, dried red kidney beans and dried green split peas, then tied hemp around the the vase.  Check out the dried bean section in the grocery store on your next visit.

This candle I glued a band of the dried green split peas on the candle, then tied hemp around it.

If  you have left over dried beans, let the kids make Christmas ornaments (it’s not too early to be thinking about Christmas decorations, is it?!?).  Glue beans to card stock or post board cut into shapes, then spray paint.

Decorative Paper Pumpkins

These cute little pumpkins are so easy and versatile – they can be in any color or shape, tall and thin to big and round! Gather up your fall colored card stock paper, and a few sticks from the yard and you’ll be ready to make pumpkins! Add the pumpkins to your centerpiece, on the fireplace mantel, in the kitchen, or – my personal favorite – tie on a cute little name tag and use them as place cards!

 

Materials:

  • paper pumpkin template {DOWNLOAD TEMPLATE PDF HERE}
  • card stock paper
  • stick (from the yard)
  • hot glue
  • scissors
  • optional: twine, ribbon, wire,decorative name card

 

Directions:

Download and cut out the pumpkin pattern.  I’m using a rustic orange color of card stock, but choose a color that works for you.  Trace 8 pumpkin shapes and 1 center piece.  Fold each pumpkin shape in half.

For the center of the pumpkin find a stick the size and shape for the stem.  I curled wire (6″) around a paint brush to add with the stem.  Take the center piece of pumpkin pattern and roll it (you could use a pencil or paint brush), not to small.  Now slide your stick (stem) and curly wire in center and hot glue (the stick (stem) should not stick out to bottom of center).

Let’s glue…run hot glue down the folded edge of pumpkin shape, lining up the straight part of the pumpkin shape with bottom of center piece (see picture).  You want the pumpkin to sit flat on bottom, so each time you glue make sure it’s lining up straight.

I think it is easier if the first 4 shapes are glued across from each other in a X pattern (see picture).

Now glue the other 4 shapes in between. And you made a paper pumpkin!  You can add ribbon or twine to the stem.

Now that you have seen the basic shape, it’s easy to change to size and shape to make paper pumpkin patch of different pumpkins!  (Remember when you change the size, make the center to fit also.)

Have fun and get creative, cut your pumpkin shape with decorative edge scissors (I used Ripple) or give the kids the card stock paper to paint or draw on before you cut.

To make paper pumpkin into a place card, I punched a 2” decorative circle for each person’s name and tied it on with twine…so cute!

Water Bottle Pumpkins

It’s so much fun for the kids to make their own easy recycled “pumpkins” from old water bottles!

Look through your recycled bin, for plastic bottles with tops, small water bottles, 2 liter soda bottles, etc. You’ll probably want to plastic if small children will be making and play with them;  you can use glass bottles, just use caution and best judgment with children.

 

Materials:

  • Plastic bottle with top
  • Orange acrylic paint
  • Black felt (easier for children if you can find the sticky back felt)
  • Green ribbon
  • Tape or glue, hot glue
  • Double sided tape  (if using black without sticky back)

 

Lets get started, finding the bottle with top might be the hardest part.  🙂 If you have the smaller round water bottles, those would be the perfect pumpkins (I didn’t, but I still think it turned out cute)!

Clean your bottle, inside and out.  Remember Goo Gone will make getting the sticky part of the label off so easy. Also, you definitely want to make sure your bottle is dry inside.

Pour about 3 to 4 tablespoons of orange paint into a 8 ounce water bottle (you do not have to measure, just pour, you can add more if needed). Screw top on and let the children roll, shake, or turn it upside down and watch the paint cover the inside of the bottle orange.  If you are happy with the paint coverage, tape or glue the bottled closed.

Now for the pumpkin face.  Cut face shapes from the black felt, use small pieces of double stick tape on each felt piece.  If you are using the sticky back felt, just cut your face shapes and peel off back.  Have fun making fun and silly pumpkin faces on your bottle pumpkin.  Tie and green ribbon around the top.

How much fun to use 2 liter bottles, make fun pumpkin faces on 7 or more and make them into bowling pins! Who can make the first pumpkin strike?

Easy Spider Halloween Decorations

It’s so easy to be invaded by spiders!  Making these little critters is a quick and easy project, perfect to do with the kids!

Materials:

  • Smooth styrofoam balls (any size)
  • Black paint and paint brush
  • Black pipe cleaners –  8 for each spider
  • 2 “googly” eyes for each spider
  • fishing line or strong thread and large long needle
  • hot glue

Paint the balls black (get some help from the kids for this fun step) and let dry.  If you want your spiders to hang from a web, thread the large needle with fishing line or strong thread.  Pull needle through the center of the ball (pliers might help to pull needle through) and tie off end.

That was the hard part.

For the legs I find it easier to make a hole for each pipe cleaner leg with the large needle or a tooth pick.  Hot glue each piper cleaner leg in, and glue two eyes. Bend and shape the legs, and your spider is done!

Hang them from webbed branches,  to make a fun center piece , hang them in the windows or the door ways, add them to a wreath or just have them “walking” on the table.

Halloween Ribbon Wreath

This is the fastest wreath you will ever put together!  This ribbon wrapped wreath can be make for any holiday or special event – I love this because the possibilities are endless. It looks great hanging on the door, also hanging in a window, or the back of the hostess chair, and even as a centerpiece with a glass hurricane and candle in the center of it.

The hardest part of this whole project is picking out which ribbons to use!

Materials:

  • Foam wreath
  • straight pins (I use .75″ sequin pins, you get 300 for $1)
  • Ribbon (a fun mixture of  patterns and solids and in varying widths)

 

Gather up your ribbon and let’s get started! Cut your ribbons into 6 1/2″ pieces (that is the size of my wreath when ribbon is wrapped around, check your size before cutting).  You will need about 40 pieces of ribbon (save some for a bow).  Start wrapping, using pins to hold in place.  I overlapped some and even added ribbon pieces on top of others.

Be creative and have fun.  If you want to add a bow, use the pins to hold it in place.  By adding a ribbon piece to the back again use the to hold you can make a hanger.

Now this is what I love – when you are finished displaying the wreath,  pull the pins out and save, put ribbon pieces (and bow) in bag with label and save for next year.  Your wreath is ready for the next holiday….or birthday….baby shower….like I said, endless possibilities.

 

 

 

Fall Pillows

A super fast and easy way to change the look of your room from season to season is to create new slip covers for your accent pillows. The possibilities for pillow covers are truly are endless;  I am showing you just one way to make slip covers, but let your creative side out and have fun with this one!

First pick your fabric for the pillow, if you like (or need) to wash the covers often,  just  make sure the fabric you choose is durable and able to be washed often.  I used 2 yards of fabric for the 3 pillows.  I made my 18″, because that is the size pillow foams (the inside stuffing) that looks best in my room.  You might like a different size, in the stores (like Jo Ann) they will carry a range of sizes and shapes.

Start by cutting – since my pillow is going to be a finished 18″, I cut a 19″ square (times 3 for 3 pillows) and for the back cut 12″ by 19″ (times 3) and 10″ by 19″ (times 3).

When creating any design or embellishment details on a pillow, you want to do that before sewing the pillow together, so let’s start with the fun fall designs. I embellished these fall pillows with felt and DMC thread (cross stitching).

Begin by making your design.  I wanted a tree, and tree branch and a flower.  Since my design was going to be large, I used newspaper to draw out my shapes.

Lay out your cut out felt shapes on the top of your 19″ fabric square (top of pillow).  Pin pieces in place.

With matching thread I did a quick stitch around the branch.  Then add the leaves, stitching down the center of each leaf.

Now for the slip pillow with the flower (I always need a flower somewhere 🙂 ).

Cut a quick flower shape – about 3″. You will need 7 and a 2″ circle for the flower base.

Take each flower shape and fold in half and fold again, pin to hold.  Do this to all 7.

Keep the pin in and cut the tip off.  With needle and thread, stitch along bottom (where you just cut).

Place 4 of the flower petals on felt circle and sew (because I’m putting the flower on a pillow sewing on gluing is best).

Sew on the other 3 petals.  For the center, cut a piece about 1/2″ by 2 1/2″.  Roll long ways and stitch in center.

For the flower buds, I made 3 petals ( cutting the flower shape, folding and folding).  This time I did not cut bottom.  I used a half circle, and wrapped the base of flower and sewed in place.

For the smaller bud I used one petal.  Play around and find what you like.

Sew your flower and buds to the pillow top.  I finished by adding leaves and a stem.

To make the stems with a quick stitch, I used straight pin to mark out my stem shape.  Make it so much easier, just stitch along the pins.

 

Now, it’s time to make the slipcovers! Cut a strip (one for each pillow you’re making); I made mine 2″ and 6″.  Fold over the 2″ side and sew down the 6″ side.

Clip the fabric to make it easier for turning. Use a safety pen to pull through.  You have the loop for the back.

Sew  back piece 12″X 19″  down one side of the 19″ side.  You will fold over raw edge and sew and fold that over and sew again (on raw edge).

Take the 10″ by 19″ back piece and fold over raw edge 19″ side one time.  Fold in half, marking the center (the side that you just sewed). Place your loop on the center mark, turn and sew back edge that was just sewn.

Are you with me so far?  We are almost there! Now, think backwards – lay your piece with the loop down first, then the other back piece (they will overlap).  You have a 19″ square and you want to pin all around your pillow to hold all pieces in place.  Start sewing your pillow together( I used a 5/8 seam).  You need to clip around all sides, and I like to cut off each corner (see pic).

You made a slip cover pillow.  Turn your pillow right side out.  Mark where your button goes ( this will hold the pillow together).  Sew your button on.  Done!  Much easier than a zipper (and the back even looks great too).

These simple designs are quick and easy, let your creative side out and have fun designing you own custom slip cover pillows!

 

I’m sharing this tutorial with Happy Hour, Patches of Pink, RoCa & Company, & Kissed by a Frog.

Rustic Stick Sunburst Wreath

This wreath is super easy, quick, and cheap! I first got inspired to make mine after seeing the idea on The Painted Hive, and I knew I wanted to try one.

Get the kids involved by getting them out to enjoy the cooler fall weather gathering up some sticks (lots and lots of sticks!).  Then, find a cardboard box to cut up and you are almost done…

MATERIALS:

  • hot glue
  • cardboard
  • burlap or ribbon
  • sticks (lots and lots of sticks!)

 

 DIRECTIONS:

Cut cardboard(I used an old box) into a 9″ circle  (I used the top to a cooking pot to trace the the circle).  Then cut a 3″ hole in center.

Cut burlap strips and wrap the strips around to cover your cardboard circle, gluing in place where needed.

*Tip:  The raw edge of burlap can be hard to work with.  Here is my tip on making burlap strips with less fraying.  It’s so easy, find your selvage edge, cut one string on both sides and pull it out (it might break, find it and keep pulling).  Now you have a perfect straight line to cut.  Keep going, you want to do this for both sides of the strip.  Your burlap is now so much easier to work this way.

Make sure your sticks are clean, with no extra dirt.  Hot glue the sticks, working your way around the circle.

When finished, wrap a long ribbon through the center and up and it’s ready to hang!

After I made this I thought about making this wreath with bamboo sticks or drift wood… or even spray painting the wreath, gloss black , white or red!  There are tons of variations that could make this wreath even more unique – have fun!

Fall Printables: It’s Fall Y’all!

Printables are my favorite quick & easy way to decorate for different seasons, so in honor of autumn, here’s a free printable!

You can download the printable in either orange or red (just click on the one you like below to download). For best results, print it on high quality card stock.

{download orange fall printable here}

 

{download orange fall printable here}

 

Enjoy!

(Printables are for personal, non-commercial use only. )

 

I’m sharing these with: Tip Junkie, Happy Hour & Patches of Pink.

Recycled Fall Wreath with Painted Paper Bag Leaves

This fun, kid-friendly project is a great way to re-use those old paper grocery bags and decorate for fall!

MATERIALS

Leaf template {DOWNLOAD LEAF TEMPLATE HERE}

Large paper bags

Paint (in fall colors – I used red, yellow, brown, and gold)

Hot glue and/or double stick tape

Wire (26 gauge)

Styrofoam wreath

Burlap or ribbon

DIRECTIONS

Download & print out leaf pattern. Wrap the wreath with burlap strips or ribbon, hot glue end to hold in place.

Here’s where the kids can get involved: it’s time to paint the paper bags. I cut the bag into sections, and painted each a different color (red, gold, yellow, brown).

After the paint is dry, cut two rectangular pieces large enough for the leaf.  Put one rectangle painted piece down (non painted side up) and glue (or use double sided tape) wire down the center. Then add more glue or tape and place the other rectangle on top (paint side up).  Lay your leaf pattern on top, then trace and cut out.

 

I made 35 leaves.

Push each leaf with wire into the wreath and continue until your wreath is covered in leaves.  The wire is flexible and allows you to bend and shape the leaves to give the wreath a little dimension.

Once the wreath is completed, you may want to attach ribbon or burlap strips so that you can hang it  – I just used small straight pins to pin my burlap strips to the back of the wreath.

 

Sharing this with Kissed by a Frog & Tip Junkie.

 

Related Posts Plugin for WordPress, Blogger...